Robotic Cell
Round Plastic Bottle Flame Treater - Multiple sizes
High Speed Bottle Flame Treater
Large Sheet Flame Treater
Flame Panels
"Gallon" Flame Treater
Drop Flame Treater
Portable Existing Conveyor Flame Treater
Buy Components

RLS Quick Contact Form:
Name:
Email:
Inquiry or Questions:


flame treater This high speed linear flame treater can increase the surface tension and dyne level on plastic or glass bottles for printing. It has also been used in many glass bottle applications to remove residue and animal fat that lines the bottles after production.

This extremely adjustable flame treater can treat both plastic and glass bottles. The first set of opposed burners will treat the opposing sides, or quadrants of round bottles. The adjustable turner will use the neck to turn the bottles 90 degrees. The second set of opposing burners will treat treat the opposite sides, or quadrants for round bottles. Speeds can be set to match your specific line speed of upstream or downstream equipment.

This truly is one of the most versatile flame treaters on the market. The RLS high speed bottle flame treater can be built to meet your specific bottle specifications. Virtually any size part with a compatible neck finish can run on this flame treatment unit.

Continued below video....

Trouble loading video? Try Flash Version / or HTML5 version / or Vimeo version

SPECIFICATIONS:

  • 3 ¼” wide tabletop chain variable speed conveyor with AC inverter drive.  The conveyor can have a vacuum chamber along the entire length.
  • Four ribbon burners customized for maximum flame treating results
  • Two precision mixing systems (two burners on each mixer)
  • Dongan automatic ignition systems and Honeywell flame safeties with flame rods. 
  • UL approved gas valves
  • Regenerative blower for the air supply to the burners.
  • Nema 12 enclosure
  • Two color light tower (red and green)
  • HMI for machine operation
  • Flow gages on the gas side of the mixer to provide accurate readout of gas and air ratio
  • Adjustable burner mounts in the in/out and up/down directions
  • Variable speed top neck turning system.  Turner system is adjustable up/down and in/out via linear guides and crank handles.  Belts have a soft lining for secure gripping of the bottle neck.  Unit comes with two variable speed DC motors. One gets set slightly faster than the other to allow the bottle to turn 90 degrees. Belts are adjustable in/out with a 0-4” opening and up/down with a 12” range. Lowest belt height is 0.5” from the conveyor top to the bottom of the belt.
  • Three sided double wall guarding on each burner
  • Back up photo eye to shut down the system should a product back up occur.
  • Casters and leveling legs
  • Fallen bottle detector and reject station prior to entering the flaming unit.
  • Full equipment manual