COMPANY
PROFILE | CUSTOM
DESIGNS | FLAME
TREATING | CONVEYOR CHAIN CLEANING SYSTEMS
BEARING CLEANING SYSTEMS | FLEXLINK
| INFORMATION REQUEST FORM | HOME
COMBINED CONVEYOR CHAIN AND BEARING CLEANER
Patent Pending
Specifications for the Chain CleanerPhysical Dimensions (for the combined unit) |
- 41" tall by 56" wide by 57" long (direction of travel) located under and alongside your existing conveyor.
Conveyor Chain Path
- Chain feeds into cleaner from the underside of the conveyor. The chain serpentines around three (3) idlers and feeds back on the underside of the conveyor.
Cleaning Method
- 4 high pressure nozzles to remove loose particles (1500 p.s.i.).
- 2 specially designed rotating scrubbing brushes to remove particles from both sides of the chain.
- 3 air nozzles to dry the chain as it returns onto the conveyor beam.
- All the above components enclosed in a polished 304 stainless steel tank with quick connections for supply and return lines.
Retractable Brushes
- The cleaning brushes pneumatically retract when not in the cleaning mode.
Cleaning Medium
- Uses a variety of solvents and detergents. Cleaning solution determined by type and degree of residue to be removed.
Mobile Control & Pump System
- The chain cleaner can be supplied by any one of the four (4) available types of pump systems. See specification sheet for Mobile Control & Pump System.
Type of Chain
- Designed to work with FlexLink® , Rexnord® and other comparable types of tabletop chain.
Performance
- Speed: Operates at existing conveyor speed up to 75 feet per minute. Higher speeds can be accommodated upon request.
![[HRule Image]](images/div.gif){kind=small}
Specifications for the Bearing Cleaner
Physical Dimensions (for the combined unit)
- 41" tall by 56" wide by 57" long (direction of travel) located under and alongside your existing conveyor.
Automatic Transfer
- Shuttles bearings off conveyor through cleaner then back on to conveyor.
Interior of Enclosure - 4 Zone System
- Zone #1 - 20 high pressure oscillating spray nozzles.
- Zone #2 - 4 spray nozzles for rinsing.
- Zone #3 - Mist collection.
- Zone #4 - Reciprocating air knives for drying.
Cleaning Medium
- Uses the customer's central solvent and filtration system (solvents with a 140o degree flash point minimum required).
- Optional self-contained units available. See specification sheet for Mobile Control & Pump Systems.
Product Application
Designed specifically for bearing components:
- Outer race
- Inner race
- Partially completed assemblies
- Completed assemblies
Environmental
- Mist collection system and air filtration system.
Performance
- Speed - 70 parts per minute for a typical 1.562 diameter bearing. Speed may increase or decrease in relation to the bearing diameter.
- Range - .500" to 5" in diameter. Adjustable track widths available as an option.
Pump System
- Centrifugal booster pump to handle petroleum or water-based solvents. Flow rates of 60 g.p.m. at 150 p.s.i..
The machine parameters can be altered to customer's specific conveyor system and product specifications.
